The overall structural characteristics and performance of the impact quick-freezer: Overall design 1. The whole equipment is designed and manufactured in compliance with HACCP and the new version of food and drug GMP, SC and other requirements; it complies with the standards of the People’s Republic of China "Food Monomer Quick Freezing Device" and commodity inspection export requirements, and is mainly suitable for granular fruits, seafood, meat, etc. And fast freezing of block food. 2. The internal and external structures of the warehouse are all made of food-grade stainless steel SUS304, all of which are argon arc welding, and the welding mouth is polished and pickled. (Except for standard parts and special parts such as reducers and motors). 3. Design process structure parameters according to the characteristics of quick freezing of frozen products. The evaporator design adopts super large effective surface area, adopts large-pitch aluminum alloy finned tube group, and the variable-pitch design reduces the temperature difference between the evaporator and the warehouse. The design selection is based on the evaporation The temperature is calculated at -45 degrees Celsius. Sufficient evaporation area, high heat exchange efficiency, full consideration of the influence of incoming and outgoing temperature, the design makes frosting lag behind, and prolongs the working time of the quick-freezer. 4. The evaporator is equipped with stainless steel SUS304 air duct support stainless steel fan blades, high-efficiency, low-noise, waterproof, moisture-proof and low-temperature resistant centrifugal fan. 5. The quick-freezing machine uses a number of fans with high-pressure air cylinders to shoot wind to the upper and lower surfaces of the product through specially customized nozzles of special specifications. This blowing method makes it equipped with enough evaporation area to better exert the heat dissipation effect and make the product Can achieve the effect of fast freezing. The unique jet blowing design is adopted to improve the quick-freezing efficiency of cold air on frozen products. The frozen product has the wind up and down, so that the frozen product freezes more quickly and the quality is uniform. At the same time, the import and export ports are designed to be equipped with low temperature resistant soft air curtains. The internal air guide adjustment device can adjust the wind direction at any time to control the symmetry of the cold air and prevent it from overflowing. The fan is equipped with a wind guide device on the side of the wall of the vertical air outlet; the adjustable wind shielding and heat preservation device controls the height of the feed and avoids the loss of cold energy. 6. The external centralized water valve is used to control the uniform water frosting to prevent bacteria from multiplying, clean and hygienic, and meet the food hygiene requirements. The evaporator in the quick-freezing room uses multi-point water spray to evenly flush the frost. The evaporator is integrally welded with a stainless steel water tray; the bottom plate is set to avoid water and ice, and the bottom plate is equipped with a stainless steel water tray; the storage body is equipped with an electric heating access door , All corners of the quick-freezer are easy to clean and maintain; except for the slow running of the mesh belt, the other transmission devices are in the insulation cover, which is easy to disassemble and install; emergency stop safety buttons and safety warning signs are set. 7. The stainless steel SUS304 conveyor mesh belt chain adopts a 38.1mm double pitch large roller chain, which rolls to avoid deformation and breakage of the chain; the mesh is made of Φ8 through rod, Φ2 through wire, Φ1.5 mesh spiral weaving, solid firm. 8. The return belt of the mesh belt conveyor is in the warehouse. The five sides of the incoming bar are insulated. An adjustable stainless steel windshield insulation board is attached to the cargo port. The six sides of the outgoing bar are insulated, which can realize automatic blanking and keep the mesh belt conveyed at low temperature. Operation, with pre-cooling effect. 9. Adopt full-length stainless steel sidewalls, and the frozen products are relatively closed inside the transmission tunnel, preventing the frozen products from turning over and blowing out of the tunnel. 10. High-quality cycloid pinwheel reducer and frequency converter realize stepless speed regulation of mesh belt transmission. The quick freezing time can be adjusted arbitrarily. 11. Adequate storage surface area, effective use of refrigeration capacity, suitable for quick-freezing processing of different frozen products, high efficiency and energy saving. Insulation structure of library body: 1. Warehouse body: The warehouse body is produced, manufactured, installed and inspected according to the standards of "Indoor Assembled Cold Storage" (ZBX99003-86) and "Insulation Sandwich Panel for Combined Cold Storage" JB/T6527-2006. The library board adopts double-sided stainless steel self-extinguishing flame-retardant polyurethane sandwich insulation board, and the panel adopts SUS304 stainless steel board. The thickness is 150 mm. The inspection door is equipped with a double-stranded double door sash, low-temperature, aging, and oil-resistant sealing double rubber strips; The insulation material in the board adopts self-extinguishing flame-retardant rigid polyurethane which meets the following indicators: 1. The bulk density requirement is ≥45kg/m3 (the average bulk density of the non-whole board is the bulk density of random cuts); the thermal conductivity ≤0.024w/m.k; 2. Compressive strength requirements: 150～200kpa for wall and roof, and ≥300kpa for ground; 3. Water absorption rate ≤4%; dimensional stability ＜1% (-30℃, 48h); self-extinguishing property ≤7 seconds. 4. The bonding between the stainless steel plate and the polyurethane is firm, the bonding force between the two should be greater than 98.1N/cm2, and the integral foaming type is adopted. The convex grooves between the library boards are connected by eccentric hooks, four layers of low-temperature resistant structural glue are applied to the joints, and the foaming tank seams at the craft openings and corner joints. The library body adopts ultra-thick polyurethane insulation board; ultra-thick 304 stainless steel anti-collision outer board; 5. Door handles and hinges are made of 304 stainless steel, with double door handles and double hinges. Mechanical transmission: 1. The conveyor belt chain net is made of food-grade bright SUS304 spring stainless steel, the net surface is flat, the chain pieces and the shaft are connected and run flexibly, and the large roller conveyor chain net rolls for transmission; 2. The friction part of the mesh belt and the guide rail slide is made of ultra-high polymer wear-resistant polyethylene material, which does not drop chips and ensures the safety of frozen products; 3. The feed port platform is equipped with a material ultra-high and over-limit device, an adjustable stainless steel wind shield and heat preservation device; the discharge port platform is equipped with automatic blanking. 4. The transmission drive adopts a frequency conversion reducer, and the mesh belt runs frequency conversion speed regulation, and the quick freezing time can be adjusted arbitrarily. Evaporator and defrost: 1. The evaporator is designed and selected according to the liquid supply evaporation temperature -45℃. 2. The evaporator adopts high-efficiency variable-pitch aluminum fin aluminum tube treated with surface oxidation and rust prevention to ensure uniform frosting and unobstructed airflow. The bracket air plate shell is made of stainless steel. 3. Equipped with a high-efficiency, energy-saving and low-noise axial fan, the air duct is stainless steel, the fan blades are rust-proof aluminum alloy, and the motor is a fully enclosed low-temperature, moisture-proof and waterproof motor, which runs smoothly. Electronic control part: 1. Electric control system: Use indoor waterproof electric control cabinet with stainless steel SUS304 material; electrical components have passed national quality certification. The protection level of all motors and external electrical components of the power distribution cabinet is not less than IP55, and the motor adopts Y2 waterproof and moisture-proof motors. The stainless steel electric control cabinet has a beautiful and firm appearance and structure, and the door opening angle is greater than or equal to 90°. The components are arranged neatly and installed firmly. Insulation resistance ≥2MΩ, three-phase five-wire withstand voltage AC380V/50Hz. Display the internal temperature, transmission frequency, fan start and stop, set variable frequency speed regulation, operate start and stop button, emergency stop button, standby cold source start and stop button and door heating start and stop button. The main control electrical components mainly adopt well-known brands such as Siemens, Schneider, and Delixi.